Automobile starting battery, automobile starting lithium iron phosphate battery pack

Automobile starting battery, automobile starting lithium iron phosphate battery pack

1、 Product features

Thank you for your trust in the special lithium iron phosphate battery for Maxima automobile start-up. We will seriously provide you with thoughtful service. The company's products meet international certification standards.

★ the use of lithium iron phosphate material has high safety, stable performance in extreme temperature environment and no explosion risk.

★ it is light and weighs only 1 / 3 of the lead-acid battery of the same specification. Users can choose products with higher capacity to make the driving range longer.

★ the product has strong universality and can directly replace the original lead-acid battery on the vehicle.

★ long service life, more than 4 times that of lead-acid battery.

★ green battery, no pollution to the environment and no harm to human health.

2、 Product list product series material type battery capacity size w * L * h reference weight instantaneous current

Cn-lp12v60ah lithium iron phosphate 40ah225x125x2058 3kgMax. 800A

Cn-lp12v60ah lithium iron phosphate 60a282x123x22811 6kgMax. 1200A

Cn-lp12v90ah lithium iron phosphate 90a280x153x24515 3kgMax. 1800A

※ 40ah is applicable to all kinds of family cars and SUVs. Lithium battery 40A can replace 40 ~ 100Ah lead-acid battery.

※ 60ah is applicable to all kinds of large vehicles and engineering vehicles. Customers with special needs for ultra-low temperature start can also choose this model.

※ 90ah is mainly designed for high current output of large gravity mechanical equipment, plant power starting equipment and so on. 3、 Product use

On the opposite side of the product, the left side is the positive pole (there is red film under the nut) and the right side is the negative pole (as shown in the figure below). The "+" and "-" marks are printed in front of the terminal, which is equivalent to the positive and negative poles of the lead-acid battery. Put the battery into the headstock. The red wire is connected to the positive pole of the battery and the black wire is connected to the negative pole of the battery. After tightening, it can be started and used. It is extremely simple, convenient and safe.

4、 Safety matters

4.1 do not replace the battery with chargers of different specifications and manufacturers, which may cause battery damage.

4.2 please do not overuse the battery to a dead state, otherwise it may damage the battery and affect the service life of the battery.

4.3 prevent long-term exposure to the sun, and keep away from fire and water sources when charging.

4.4 do not use the battery in any way other than car starting. If you need to use it, please consult our company in advance.

4.5 avoid charging in places with many children and animals and valuables.

5、 Storage

5.1 avoid fire and water during storage, and store in a well ventilated place with temperature between - 10 ~ 30 ℃ and humidity lower than 75%.

5.2 if it is not used for a long time, charge the battery to 50 ~ 60% of the full charge before storage, and check the charge once a month to keep it at 50 ~ 60% of the charge.

5.3 during long-term use, charge and discharge 1 ~ 3 times every 3 months, which can prolong the service life of the battery.

6、 Emergency measures

6.1 if the charging cannot reach the end point for a long time: check whether the battery is hot and other abnormalities, otherwise stop charging immediately.

6.2 if the charger and battery overheat: stop charging immediately.

6.3 No output of battery: check whether the battery needs to be charged. If the battery is insufficient, it should be charged as soon as possible;

7、 Shelf life description

7.1 in the first two years of the warranty period, if there are quality problems in normal use, the manufacturer will repair or replace them free of charge.

7.2 in the third year of normal use, if there is a fault, the manufacturer will repair it free of charge. If the parts need to be replaced, the user must pay the material cost.

7.3 the manufacturer will provide paid maintenance service in case of failure during the period from use to 3 ~ 10 years.